Operating instructions

Installation and Operation, cont’d
TP T Series Transmitters • Installation and Operation
2-6
PRELIMINARY
The following illustration shows how to mount the transmitter on a 9.5" rack shelf.
Use 2 Mounting Holes
(each side)
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
RSM 100
TP Mounting Bracket
Rack mounting the transmitter
Under-desk mounting
Furniture-mount the transmitter under a desk or shelf using the optional mounting
kit (part #70-077-01), as illustrated below.
To mount the transmitter under a desk, podium, or table top,
1. If rubber feet are attached to the bottom of the unit, remove them.
2. Remove the two screws from one side of the unit. Retain the screws for
possible later reassembly.
3. Attach one bracket to the side of the unit, using the provided machine screws.
4. Repeat steps 2 and 3 on the other side of the unit.
5. Hold the unit with the attached brackets against the underside of the table or
other furniture. On the mounting surface, mark the location of the bracket’s
screw holes.
Under-desk mounting the transmitter