User guide

For mounting the VTT001 MAAP or VTR001 MAAP to a rack mount shelf, mount the
transmitter/receiver modules to the A/V connector frame, then attach the frame to the
shelf, as shown below.
(4) #4 - 40
Screws
(4) #6 Screws
RSB 129 (60-190-01)
Rack Mount Shelf
VIDEO INPUT
VTT 001 CM
Twiste d Pai r Trans mitt er
POWER
CPM1
33 (60-584-15) or
A/V C
onnector Frame
Figure 12. CPM133 A/V Connector Frame Mounted to a Rack Shelf
2. Attach all power and video cables to the rear of the transmitter/receiver. Power on the
transmitter/receiver now if the external power supply cannot be accessed once the
transmitter/receiver is mounted.
3. Attach the video input and output devices to the front faceplates of the transmitter and
receiver, respectively. Power on all devices.
For mounting the VTR001 AAP to a rack, mount the AAP modules to the Extron AAP
frame, then attach the frame to the rack, as shown below.
VTT001 and VTR001 User Guide • Installation 16