Setup Guide Manual

ManualsBrandsExtron Electronics ManualsHardwareTP T 15HD 45, TP T A 45

This card provides quick start instructions for an

experienced installer to set up and operate the

TP T 15HD 45 (for video) and TP T A 45 (for audio).

Step 1 — Powering down

Power off all devices and disconnect them from the power source.

Step 2 — Connecting to the UTP

cable

Connect the UTP cable from the receiver to the

8-pin connector on the TP T 15HD 45. Terminate

the cable to the same standard as shown to the

right.

Step 3 — Connecting input/output

devices

Using the 15-pin front panel HD connectors,

attach RGBHV/RGBS/RGsB/component/S-video

input to the transmitter and a display output to the

receiver. See the example

application diagram below.

Step 4 — Connecting the

TP T 15HD 45 to the

TP T A 45

If the TP T A 45 is being installed,

connect the TP T A 45 to the

TP T 15HD 45.

N The TP T 15HD 45 may be

used in a stand-alone video-

only module setup without the

TP T A 45. The TP T A 45

derives its power from the

TP T 15HD 45.

Step 5 — Connecting the

power supply

Connect the external power supply to

the TP T 15HD 45.

Step 6 — Power up

Power up all input and

output devices, apply power to the

transmitter and receiver, and test for

video and, if applicable, audio.

Wire color

White-green

NOTE If you are using Enhanced

Skew-Free™ A/V cable, use th

TIA/EIA T568A standard only.

Green

White-orange

White-blue

Orange

White-brown

Brown

Wire color

T568A T568B

White-orange

Orange

White-green

White-blue

Green

White-brown

Brown

Side

Blue Blue

Insert

Twisted Pair

Wires

Pins:

12345678

RJ-45 Connector

Extron

TP R 15HD A

Twisted Pair

Receiver

C SYNC

SOG

C VIDEO

N/C

L R

AUDIO

OUTPUT

AV INPUT

RGB

POWER

15V

.34A MAX

Projector

Mounting

Bracket

Mounting

Bolt

Projector-mountable

Extron

TP T A 45

TP T 15HD 45

Twisted Pair

Tr ansmitters

COMPUTER

INPUT

AUDIO

INPUT

CAT 5/6 or

Extron

Skew-Free

UTP Cable

Up to 500 feet

Setup Guide — TP T 15HD 45, TP T A 45

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500

+1.714.491.1517 FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794

+1.919.863.1797 FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800

+971.4.2991880 FAX

68-924-50

Rev. A

02 09

Summary of content (1 pages)

PAGE 1
Setup Guide — TP T 15HD 45, TP T A 45 This card provides quick start instructions for an experienced installer to set up and operate the TP T 15HD 45 (for video) and TP T A 45 (for audio). Step 1 — Powering down Power off all devices and disconnect them from the power source. Step 2 — Connecting to the UTP cable RJ-45 Connector Side Pins: 12345678 Connect the UTP cable from the receiver to the 8-pin connector on the TP T 15HD 45. Terminate the cable to the same standard as shown to the right.