User`s manual

TP Receivers • Installation and Operation
2-9
TP R 15HD A only — For optional rack mounting, mount the
receiver on a Rack Shelf Kit for 3.5 inch deep products (Extron
part #60-190-20), figure 2-4. The TP R 15HD A mounts in one of
four locations on the rack.
(2) 4-40 x 3/16" screws
Use 2 Mounting Holes on
Opposite Corners
3.5” Deep Rack Shelf
1/4 Rack Width False Front
Face Plate
TP R 15HD A
RGB
PEAKING
LEVEL
TP R 15HD A
RGB
PEAKING
LEVEL
TP R 15HD A
RGB
PEAKING
LEVEL
Figure 2-4 Rack mounting the TP R 15HD A
1. If feet were previously installed on the bottom of the
receiver, remove them.
2. Mount the receiver on the rack shelf, using two
4-40 x 3/16 inch screws in opposite (diagonal) corners to
secure the receiver to the shelf.
3. Install blank panel(s) (included universal rack kit, optional
for the basic rack kit) or other unit(s) to the rack shelf.
N
Only the TP R 15HD A can be mounted on a 3.5 inch
deep shelf. Any 1U rack-mountable Extron product can
be mounted on the standard shelf.