User guide
Updating Firmware From a Web Browser
1. Power on a computer that is connected to the same network as the TLP 710CV.
2. From the Extron website (www.extron.com), download the firmware for the touchpanel.
Click the Download tab on the Extron home page and select the Firmware option (see
figure 20).
3. Navigate to the touchpanel firmware and click Download.
4. This downloads the firmware to your computer. Note the folder in which the firmware file
is saved.
5. Open your browser and type the IP address of the TLP 710CV unit into the address box.
The browser opens the TouchLink touchpanel web pages (see page 23).
Figure 23. Firmware Upgrade Web Page
6. Click the Configuration tab at the top of the page and then select Firmware Upgrade
from the bar on the left.
7. Use the Browse button to navigate to the firmware file that was saved in step 4 and select
the appropriate firmware file.
8. Click Upload. The Touchpanel screen shows the message “Firmware Uploading... Please
Wait...”. When the rmware is uploaded, the screen shows the message “Restarting...”.
Once the firmware is installed, the touchpanel can be calibrated using the on-screen
menus (see page 18) or the TouchLink touchpanel web pages (see page 23).
TLP 710CV • Conguration Software 27