User guide
Configuration
Software
This section of the user guide provides information about:
z The Configuration Software
z Installing the Software
z Using the TouchLink Touchpanel Web Pages
z Updating the Firmware
z Using GUI Configurator
z Using Global Configurator
The Conguration Software
Create a graphical user interface (GUI) for the TouchLink touchpanel in two steps:
1. Design the layout of the text and graphics using GUI Configurator.
2. Assign functions to the text and graphics using Global Configurator.
The GUI Congurator software is a Windows-based application. The interface is designed
either by customizing an existing template or by designing an entirely new interface. GUI
Configurator offers several templates that are designed to manage control system devices.
After the GUI has been designed on a PC, the project is saved, built, and uploaded to the
TouchLink touchpanel to verify what it looks like on the screen. It is then imported from the
TLP unit to Global Congurator where control functions are assigned to the text and graphics
in the layout. After assigning the control functions, the project is rebuilt and uploaded to the
controller.
These two programs provide versatility and adaptability for conguration and control of an AV
system as it grows and evolves.
Installing the Software
GUI Congurator and Global Congurator Installation
NOTE: You must use Global Congurator 3.3 or a later version and GUI Congurator 1.3
or a later version to congure the TLP 710CV.
Insert the disc provided into the DVD-ROM drive of the computer. If the setup program
does not start automatically, run
Launch.exe from the DVD-ROM directory in Windows My
Computer. Select the Software tab, locate the GUI Congurator program and click Install.
Follow the on-screen instructions.
By default, the Installer program creates and places the GUI Congurator program in the
C:\Program Files\Extron\GUI Configurator folder. An icon may also be placed on the
Windows desktop.
TLP 710CV • Conguration Software 22