User guide
Configuration
and Calibration
Overview
By now, the TLP 710CV must be installed in a suitable place, all necessary cables securely
attached, and the unit powered on. This section provides an overview of calibrating, designing
the screen layout, and adding functions to the touchscreen.
Screen Conguration and Calibration
1. Press the Menu button once. The Main screen opens.
2. Adjust values as required.
3. Press the appropriate button on the edge of the screen to select the Main, Volume, Time,
Network, or Video menu and adjust the desired values from each menu.
4. Press the Menu button a second time to open the calibration-screen.
5. Press the square that is colored green until it turns gray and the next square turns green.
When all four squares have been calibrated, the screen reopens to the Main screen.
6. Press the Exit button to save changes and leave the menus.
Installing Software and Firmware
You will need to install GUI Congurator (version 1.3 or later), Global Congurator (version 3.3
or later), and Firmware Loader on your computer. These programs are available on the DVD
that ships with the TLP 710CV and from the Extron website.
Firmware can be upgraded by downloading it to your PC from the Extron website. It can be
uploaded to the touchpanel using Firmware Loader, GUI Configurator, or the Web Control
pages for the touchpanel.
1. Check the Extron website to see if the rmware for the TLP 710CV has been upgraded.
2. Download the latest version to your PC and note the folder where it is saved.
3. Upload the firmware to the touchpanel by one of the available methods.
Designing the Screen Layout
1. Use Extron GUI Configurator (version 1.3 or later) to design the graphical user interface
that will appear on the TouchLink touchpanel (see the GUI Congurator help le for
further information).
2. Upload the graphical user interface to the touchpanel.
Linking Control Functions to Screen Objects
Use Global Configurator to associate the touchpanel with an IP Link controller and to assign
functions to the on-screen objects.
TLP 710CV • Calibration and Conguration Overview 17