User guide

3. Also from the Extron Download page, download the firmware for the TouchLink
panel. Click the Firmware link on the left sidebar.
Figure 23. Extron Web Page — Download Center
4. Navigate to the TLP 710MV or TLP 710TV firmware and click Download.
This downloads the firmware to your computer. Note the folder in which the firmware
file is saved.
5. Open the Extron Firmware Loader by clicking on the desktop icon.
6. Select TLP 710MV or TLP 710TV from the Device drop-down menu.
7. Select TCP/IP from the Connection Method drop-down menu.
8. Enter the IP address for the TLP 710, a Telnet port number (usually 23), and a
password.
9. In the New Firmware File “Path” pane, navigate to the file that was saved in step 4.
Click the Add button. The main Firmware Loader screen opens with the TLP710MV
or TLP 710TV listed in the device pane.
10. Click Begin. The firmware transfer begins and takes approximately three minutes.
When the Total Progress box shows “Completed,” select Exit from the File menu to
exit Firmware Loader.
TLP 710MV and TLP 710TV • Configuration Software 22