User guide

4. To upgrade the ﬁrmware, select Firmware Upgrade. For more detailed instructions,

see Updating Firmware from a Web Browser on page23.

5. Click the Touchpanel tab to access the Touchpanel Conﬁguration page, which allows

the user to alter the touchpanel and volume settings. These correspond to the Main

settings (see page 14) and Volume settings (see page 15) in the on-screen menus.

Figure 22. Touchpanel Configuration Page

Updating the Firmware

Firmware for both touchpanels can be upgraded using the Extron Firmware Loader,

using the TLP 710 default web page, or using GUI Configurator. Before starting,

consult your IT team and ensure that the touchpanel has a unique IP address.

Updating Firmware Using Extron Firmware Loader

1. Power on a computer that is connected to the same network as the touchpanel.

2. Install the Extron Firmware Loader utility onto the computer if it is not already present.

This is on the software disc that ships with unit or can be downloaded, free of charge,

from the Extron website (www.extron.com).

To install from the disc, insert the disc into the DVD drive of the computer and follow

the same procedure as Installing GUI Configurator and Global Configurator (see

page 18).

To install from the Extron website (www.extron.com), select the Download tab and

then the Software tab. Locate the Firmware Loader and click Download. Follow the

on-screen instructions to complete installation.

TLP 710MV and TLP 710TV • Conﬁguration Software 21