Setup guide

TLP 350CV Setup Guide, Continued
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2009 Extron Electronics. All rights reserved.
Designing the TLP 350CV Interface with GUI Configurator
Install the GUI Configurator software on a
PC and use it to design the interface that will
appear on the TLP 350CV screen.
N
The Extron GUI Configurator
software is on the disk included with
the TouchLink Panel and may also be
downloaded (free of charge) from the
Extron Web site (www.extron.com).
For information about downloading
GUI Configurator, consult the
TLP 350CV User's Manual, also
available from the Extron Web site
(www.extron.com).
Open the program by clicking on the desktop
icon or by using Windows Explorer to navigate
to the correct file on your computer. When the
program opens (see the screen at right), there
is an option to open an existing project, open
an existing template, or start a new project to
design a completely new interface.
N
Consult the GUI Configurator Help File for information about using GUI Configurator. To open the help file, click
on the Help menu and select Contents or press the F1 button on your keyboard.
Configuring the TLP 350CV Interface with Global Configurator 3
Install the Global Configurator 3 software on a PC and use it to assign functions to the screen elements created with
GUI Configurator.
N
The Extron Global Configurator 3
software is on the disk included with
the TouchLink Panel and may also be
downloaded (free of charge) from the
Extron Web site (www.extron.com).
For information about downloading
Global Configurator 3, consult the
TLP 350CV User's Manual.
Open the program by clicking on the desktop
icon or by using Windows Explorer to navigate
to the correct file on your computer. When the
program opens (see the screen at right), follow
the on-screen instructions to configure the IP
address of the units. Open the project created
with GUI Configurator 3 and assign functions
to the buttons and screen graphics and text.
When the functions have been assigned to all screen objects, build the project and upload it to the IP Link unit. For
complete information, consult the TLP 350CV User's Manual
N
Consult the Global Configurator 3 Help File for information about using Global Configurator 3. To open the help file,
click on the Help menu and select Contents or press the F1 button on the keyboard.