User guide

Video Screen
Main
Volume
Time
Network
Video
Exit
Down Up
Contrast: 064
Down Up
Color: 064
Down Up
Brightness: 128
Down Up
Tint: 128
Figure 17. Video Screen
When a video input is connected to the MTP input, the video can be previewed in the
small gray rectangle on the screen. The preview allows you to adjust the following video
properties, using the appropriate Down or Up buttons:
• Contrast between 0 and 127 (default, 64)
• Color between 0 and 127 (default, 64)
• Brightness between 0 and 255 (default, 128)
• Tint between 0 and 255 (default, 128)
Touch Calibration Screen
After setting the Main, Volume, Time, Network, and Video values, press the Menu
button a second time to begin calibrating the touch area of the touchpanel.
+
+
++
Press and Hold
Highlighted Box
Until Color Changes
Figure 18. Touch Calibration Screen
Press on the green box until the color reverts to gray with a white border and a second
box is highlighted. Repeat until all four boxes have been pressed and calibrated. At that
point the screen automatically returns to the Main screen (see page 14).
Exit the on-screen menus, by pressing the Exit button in the bottom left corner of the
menu screens.
TLP 1000MV and TLP 1000TV • Initial Conguration and Calibration 17