User Guide Manual

5-31System 5 IP • SIS

™

Programming and Control

PRELIMINARY

Command/response table for SIS commands (continued)

Command ASCII (Telnet) URL Encoded (Web) Response Additional description

(host to switcher) (host to switcher) (switcher to host)

Reset some audio settings

Esc

ZA W ZA

Zpa To reset per-input gain and global treble and

bass settings to 0, use this command.

Reset all audio settings

Esc

ZAAA W ZAAA

Zaa All gain, attenuation, volume, and other

audio settings are restored to the factory

defaults. Video and IP settings are not

changed. This command sets per-input gain

to 0; treble and bass to 0; balance to center;

audio output to stereo, -10 dBV; and volume

to 25% (V = 10).