User Guide Manual

5-29System 5 IP • SIS
™
Programming and Control
PRELIMINARY
Command/response table for SIS commands (continued) Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to switcher) (host to switcher) (switcher to host)
Button lamp/light control
Esc
X212
LC W
X212
LC
|
Lse
X212
This command specifies which buttons (among Power On, Power Off, and Function/Room buttons) light and in what colors. You can use this to change the lighting on a single button or on all of the changeable buttons at once.
X212
= Status (in hexadecimal characters) of
control of lamp enabling
Binary bit map for control of button lights
Example Light buttons: • Power On = amber • Function 1 = green • Function 2 = red • Function 4 = amber
X XX X X X X X X X X X
1 11 1 0 0 1 0 0 1 0 0
Control bit pairs (XX) per button 00 = no light (lamps off) 01 = green light 10 = red light 11 = amber light
00000###
Power On
Power Off
Function/Room 1
Function/Room 2
Function/Room 3
Function/Room 4
Convert
binary to
hexa-
decimal.
Add five
leading zeros
to the hex characters.
00000###
LC
Insert
number
into
command.
Esc
Hex Nibble Hex NibbleHex Nibble
00000C93
Power On
Power Off
Function/Room 1
Function/Room 2
Function/Room 3
Function/Room 4
Convert
to hex.
Five
Leading
Zeros
00000C93
LC
Insert
number
into
command.
Esc
93C
SCREEN
UP
SCREEN
DOWN
ON OFF
SCREEN
STOP
DISPLAY
CONFIG
IR
Amber Off Green Red Off
Read script button lamp cntrl status
Esc
LC W LC
|
X212