User Guide Manual

SIS
™
Programming and Control, cont’d
System 5 IP • SIS
™
Programming and Control5-28
PRELIMINARY
Command/response table for SIS commands (continued) Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to switcher) (host to switcher) (switcher to host)
Select firmware or script control of buttons
Esc
X211
LZ W
X211
LZ
|
Bse
X211
This command determines whether the firmware or a script (software-generated instructions) controls the functions and lighting of a given button.
X211
= Status (in hexadecimal characters) of
script control of button enabling.
Binary bit map for script control of button enabling
Example: Change the Power On and Power Off buttons' functions from firmware control to script control. Example: Change Function buttons 1, 2, and 3's functions from firmware to script control.
Power On
Power Off
Function/Room 1
Control bits (X) 0 = firmware control 1 = script control
Function/Room 2
Function/Room 3
Function/Room 4
Power On
Power Off
Function/Room 1
Function/Room 2
Function/Room 3
Function/Room 4
1
000000##
10
00000003
000
03 1C
XXXXXX00
00 00
Convert
binary to
hexa-
decimal.
Convert
to hexa-
decimal.
Add six
leading zeros
to the hex characters.
Six
Leading
Zeros
Six
Leading
Zeros
00000003 LZ
Insert
number
into
command.
Esc
000000## LZ
Insert
number
into
command.
Esc
Power On
Power Off
Function/Room 1
Function/Room 2
Function/Room 3
Function/Room 4
001
0000001C
110
Convert
to hexa-
decimal.
0000001C LZ
Insert
number
into
command.
Esc
Hex Nibble Hex Nibble
Read firmware/script button control status
Esc
LZ WLZ
|
X211