User Guide Manual

SIS
™
Programming and Control, cont’d
System 5 IP • SIS
™
Programming and Control5-18
PRELIMINARY
Command/response table for SIS commands (continued) Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to switcher) (host to switcher) (switcher to host)
Query FPGA version 32Q 32Q
X11
Show the field-programmable gate array
(FPGA) firmware version to two decimal places.
Query I/O processor version 33Q 33Q
X11
Show the main board (I/O) firmware
version to two decimal places.
Request the switcher’s part number N N 60-397-XX
Show the System 5 IP’s part #. Models made before January 5, 2006: Sys. 5 with both FPC and amp: 60-397-01. Sys. 5 with FPC, without amp: 60-397-02. Sys. 5 without FPC, with amp: 60-397-10. Sys. 5 without FPC or amp: 60-397-12. Models made on or after January 5, 2006: Sys. 5 with both FPC and amp: 60-397-81. Sys. 5 with FPC, without amp: 60-397-83. Sys. 5 without FPC, with amp: 60-397-82. Sys. 5 without FPC or amp: 60-397-84.
Request A/V input numbers I I Vid
X200
•Aud
X200
Show which video and audio input(s) is (are) active.
X200
is the input number.
Request the model name 1I 1I SYSTEM 5IP
Request the model description 2I 2I SYSTEM 5IP w/FPC System 5 IP with front panel control (FPC)
and amplifier.
SYSTEM 5IP w/FPC NO AMP
System 5 IP with FPC, but without amplifier.
SYSTEM 5IP w/o FPC
System 5 IP without FPC but with amplifier.
SYSTEM 5IP w/o FPC NO AMP
System 5 IP without FPC or amplifier.
Request system memory usage 3I 3I # bytes or kbytes used out of # of kbytes
Show amount of memory used and total available memory for system operations.
Request user memory usage 4I 4I # bytes or kbytes used out of # of kbytes
Show amount of user memory used and total available user memory.
Firmware version, part number & information requests