User Guide Manual

5-15System 5 IP • SIS
™
Programming and Control
PRELIMINARY
Command/response table for SIS commands (continued) Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to switcher) (host to switcher) (switcher to host)
Configure receive timeout
24
Esc
X1
*
X17
*
X20
*
X23
*
X21
CE
W
X1
%2A
X17
%2A
X20
%2A
X23
%2A
X21
CE
|
Cpn
X1
•Cce
X17
,
X20
,
X23
,
X21
Set the time to wait (
X17
= waiting time in
tens of ms until receipt of the first response character before terminating the command,
X20
= waiting time in tens of ms between
characters before terminating) and priority status (
X23
: 0 = default, use send data string
command parameters; 1 = use configure receive timeout command parameters) for port
X1
.
X21
= #L or #D (see previous page).
The response includes leading zeros.
View receive timeout
Esc
X1
CE W
X1
CE
|
X17
,
X20
,
X23
,
X21
IR/serial data port (unidirectional)
Send an IR command
28
Esc
X215
,
X57
,
X58
,
X59
IR
W
X215
%2C
X57
%2C
X58
%2C
X59
IR
|
Irs
X215
,
X57
,
X58
,
X59
Send an IR command via IR/Serial Output
port number
X215
(1 = port A, 2 = port B,
3 = port C, 4 = port D).
X57
= the IR file number (0-99),
X58
= IR
function number (1-127),
X59
= IR playback
mode (0 = play once, 1 = play continuously).
To stop mode 1 IR command playback (continuous playback), send the IR command again but with playback mode (
X59
) = 0. Also, the response includes leading zeros.
Get IR command info
28
Esc
X57
,
X58
IR
W
X57
%2C
X58
IR
|
{descriptive text} The response to this command is the name/
description (e.g., Power On, Power Off, Enter, Play, Stop, RGB, Menu) of the specific command you ask about.
X57
= the IR file number (0-99), as in files
1.eir, 2.eir, 3.eir, etc. stored in the switcher. Each ___.eir file contains commands for a specific device.
X58
= IR function number (1-127), which
corresponds to a specific function/ command set contained within the file.
Example:
Esc
3,1IR W3%2C1IR
|
POWER Command/function 1 in file 3.eir is the
Power command.
Example:
Esc
3,2IR W3%2C2IR
|
E13 Command/function 2 in file 3.eir is not
defined or does not exist, so the switcher returns E13, the invalid value error number.