User guide

SW USB Series • Operation 22
12. Click Begin. The following indicators on the Firmware Loader window show the
progress of the update:
• The Transfer Time section shows the amounts of remaining and elapsed time for the
update.
• The Total Progress section displays a progress bar with Uploading... above it.
• In the Devices section, the Progress column displays an incrementing percentage
and another progress bar. The Status column displays Uploading.
Figure 15. Firmware Upload in Progress
When the upload is complete, the Remaining Time field shows 00.00.00, the Progress
column shows 100%, and Completed is displayed above the progress bar and in the
Status field.
Figure 16. Firmware Upload Complete
13. When the firmware upload and unit reset are complete, close the Firmware Loader
window.