User Guide User guide

SW MTP T Series Switchers • Remote Control SW MTP T Series Switchers • Remote Control
Remote Control, cont’d
Command/response table for SIS commands (continued) Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Command/response table for SIS commands (continued) Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Video Mute
Mute video 1B Vmt
X3
Video mute on
Unmute video 0B Vmt
X3
Video mute off
Read video mute B
X3
Video mute status
Audio Mute
Mute audio 1Z Amt
X3
Audio mute on
Unmute audio 0Z Amt
X3
Audio mute off
Read audio mute Z
X3
Audio mute status
Front panel mode
Set normal switch mode 1# F1 Set switch mode to normal.
Set auto switch mode 2# F2
Set switch mode to auto (auto-switch).
Front panel lockout (executive mode)
Lock front panel 1x Exe1 Lock front panel.
Unlock front panel 0x Exe0
Unlock front panel.
Read front panel lock x
X3
Read front panel lock: 1 = locked, 0 = unlocked.
4-6
View, information, part number, and firmware requests
Information request IV
X1
•A
X1
•F
X5
•Vmt
X3
•Amt
X3
•Exe
X3
Example V2•A2•F2•Vmt 0•Amt 1•Exe 1
Video input 2; audio input 2; front panel mode auto; video not muted, audio muted, panel locked.
Request for part number N 60-xxx-xx
See Appendix A for part numbers.
Query firmware version Q
X4
Firmware version x.xx.
Reset
Master reset
Esc
Zxxx Zpx Unmute video and audio, select manual switch
mode, and unlock front panel.
4-7