User guide

SW HDMI Series • Remote Communication and Control 25
Command
ASCII Command
(Host to Switcher)
Response
(Unit to Switcher)
Additional Description
EDID Minder (continued)
Save display EDID to user
location
E
S
X$
EDID
}
Edid S
X$ ]
Store the EDID of the connected display
as user-assigned EDID file
X$
.
X$
= 50 through 53
View EDID native resolution
E
N EDID
} X^ ]
Show native resolution and refresh rate
X^
from current EDID selection.
Example
E
N EDID
}
1600x1200 @ 60 Hz
]
HDCP Authorized Device
Enable or disable HDCP
authentication per input
E
E
X!
*
X@
HDCP
}
Hdcp E
X!
*
X@ ]
Set HDCP authentication for input
X!
to
X@
. For
X@
:
0 = Disable HDCP authentication
1 = Enable HDCP authentication (default)
Enable or disable HDCP
authentication for all inputs
E
E
X@
HDCP
}
Hdcp E
X@ ]
Set HDCP authentication to
X@
for all
inputs.
View HDCP authentication
status
E
E HDCP
}
Hdcp E
X@
•...
X@ ]
View the current HDCP authentication
setting.
Front Panel Lockout
Enable or disable lock mode
X*
X Exe
X* ]
Select front panel lock mode
X*
. For
X*
:
1 = locked, 0 = unlocked (default)
View lockout status
X
X*]
Show executive mode status.
Front Panel IR Receiver Enable and Disable
Enable and disable IR receiver
X1!
* 65# IRDisable
X1! ]
Disable the IR remote receiver on the
front panel from receiving signals from
the IR remote control.
View IR status
65#
X1! ]
View IR receiver status
X1!
. For
X1!
:
0 = IR Disable feature is off (IR enabled)
(default).
1 = IR Disable feature is on (IR disabled).
Unit Name
Set unit name
E X1#
CN
}
Ipn•
X1# ]
Assign name
X1#
for the switcher.
X1#
can consist of up to 24 alphanumeric
characters, including the hyphen (-).
Set name to factory default
E
•CN
}
Ipn•SW-HDMI-SERIES
]
View unit name
E
CN
} X1# ]
Show the current switcher name (
X1#
).
Information Requests
Request information
I
V
X!
•F
X1@
•Vmt
X@
•Amt
X@ ]
Show the selected video inputs, switch
mode, video muting status, and audio
muting status (audio models only).
X!
= input number: 1 through highest
number of inputs available.
X@
= video or audio mute status. For
X@
:
1 = muted, 0 = unmuted
X1@
= Switch mode. For
X1@
:
1 = normal, 2 = auto-input mode
Example:
I
V4
•F2•Vmt0•Amt0
]