User Guide Instruction Manual

Command ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
Listening Mode Preference for each Mode Override Group
Set listening mode
preference for each mode
override group
EUX!*X3**X4!
SSP}
SspUX!*X3**X4!]
Sets the listening mode preference for
each mode override group.
View listening mode
preference for each mode
override group
EUX!*X3*SSP} SspUX!*X3**X4!]
Displays the current listening mode
preference for each mode override
group.
Mono Source Setting (for Analog input #5 only)
Set mono source to left
channel
E N1SSP} SspN X1)]
Sets mono source:
X1) — Mono source
1 = Left
2 = Right
3 = Left + Right (default)
Set mono source to right
channel
E N2SSP} SspN X1)]
Set mono source to left +
right channel
E N3SSP} SspN X1)]
View current mono
source
E NSSP} SspN X1)]
Shows the current mono source setting.
Analog Input Gain Adjustment (for Analog Input #5 only)
Set analog input gain
level
E A X( SSP} SspA X(]
Sets the analog input gain level:
X( — Input gain
0 to +24 dB in 1 dB steps (default = 0)
View current analog input
gain level
E ASSP} SspA X(]
Displays the current analog input gain
Enable/Disable Parametric EQ Filter Bypass for each Output Channel
Enable bypass
EEX@*X4$ *0SSE} SseE X@*X4$*X#] X# — Status
0 = Off (default)
1 = On
X4$ — Parametric EQ filter selection (1
to 9).
1 is the lowest frequency range
9 is the highest frequency
Disable bypass
EEX@*X4$ *1SSE} SseE X@*X4$*X#]
View current bypass
status
EEX@*X4$ *SSE} SseE X@*X4$*X#]
NOTE: X! Input (1-5): 1 and 2 = Digital audio, optical input; 3 and 4 = Digital audio, coaxial input; 5 = Analog input
X3* — Mode Override Group: 0 = No Mode Override (no LEDs on); 1 = Multichannel Downmix (DOWNMIX);
2 = Dolby Pro Logic II/IIx ( PL II/IIx); 3 = DTS Neo:6 (DTS NEO:6); 4 = To All (TO ALL)
X4! — Mode Override Group Listening Mode Options: 1 = Stereo (DOWNMIX); 2 = Mono (DOWNMIX);
3 = Dolby Pro Logic II/IIx Movie ( PL II/IIx); 4 = Dolby Pro Logic II/IIx Music ( PL II/IIx); 5 = DTS Neo:6 Cinema (DTS NEO:6);
6 = DTS Neo:6 Music (DTS NEO:6); 7 = Stereo to All (TO ALL); 8 = Mono to All (TO ALL))
SSP 7.1 • SIS Commands 91