User Guide Instruction Manual

Error Messages

E01 — Invalid input channel number (too large)

E10 — Invalid command

E13 — Invalid value (too large)

E14 — Not valid for this conﬁguration

NOTE: No Override (X3* = 0) in the

U command cannot be viewed or configured:

attempting to do so produces an E14 error message

Expected Unsolicited Responses

Some events trigger a response from the SSP 7.1 without an SIS command being entered:

Event Response

Audio Input

Aud

X!]

Audio Input Source Change

SrcFormat

X2$•SamplingX2%•EnChanX2^]

Volume Level

Vol

X^]

Input Listening Mode

SspL

X!*X2$*X1@]

Mode Override Selection

SspQ

X!*X2$*X3*]

Analog Level Input Adjustment

SspA

X(]

Front Panel Lockout

Exe

X#]

Clip

Sts3*

X#]

DTS 96/24 if DTS Source Format

DTS9624•

X#]

SSP 7.1 • SIS Commands 84