User Guide Manual

SMX System MultiMatrix Switcher • Introduction 2
The table below gives a list of available I/O boards, the number and type of connectors, and
the number of slots used by any given board. For example, from the first row, the SMX 84 V
is an 8x4 (8 inputs by 4 outputs) composite video board. It takes up one slot, and has BNC
connectors.
Board Type I/O Connector
Board Names
Board Sizes (Slots Used)
Composite
Video
BNC
SMX 84 V
8x4 (1)
SMX 88 V
8x8 (1)
SMX 1616 V
16x16 (2)
S-video BNC
SMX 84 YC
8x4 (2)
SMX 88 YC
8x8 (2)
SMX 1616 YC
16x16 (4)
SDI and
HD-SDI
BNC
SMX 44 HD-SDI
4x4 (1)
SMX 84 HD-SDI
8x4 (1)
SMX 88 HD-SDI
8x8 (1)
SMX 1616 HD-SDI
16x16 (2)
Ultra
Wideband
BNC
SMX 84 WB
8x4 (1)
SMX 88 WB
8x8 (1)
SMX 1616 WB
16x16 (2)
Sync BNC
SMX 88
SYNC (H or V)
8x8 (1)
SMX 88 H+V
8x8 (2)
SMX 1616
SYNC (H or V)
16x16 (2)
Stereo Audio
Captive
screw
LR
SMX 84 A
8x4 (1)
SMX 88 A
8x8 (1)
SMX 1616 A
16x16 (2)
DVI
DVI-I
(digital)
SMX 44 DVI
4x4 (1)
SMX 48 DVI
4x8 (2)
SMX 84 DVI
8x4 (2)
SMX 88 DVI
8x8 (2)
DVI-Pro
SMX 44
DVI Pro
4x4 (1)
SMX 48
DVI Pro
4x8 (2)
SMX 84
DVI Pro
8x4 (2)
SMX 88
DVI Pro
8x8 (2)
S-video
Boards
mini DIN
SMX 84 SV
8x4 (1)
SMX 88 SV
8x8 (1)
SMX 1616 SV
16x16 (2)
HDMI HDMI
SMX 44 HDMI
4x4 (1)
SMX 48 HDMI
4x8 (2)
SMX 84 HDMI
8x4 (2)
SMX 88 HDMI
8x8 (2)
Wideband
VGA
15-pin HD
SMX 84 VGA
8x4 (2)
SMX 88 VGA
8x8 (2)
SMX 1616 VGA
16x16 (4)
Fiber Optic
(singlemode)
Optical
(SFP)
SMX 88
FOX 4G SM
8x8 (1)
SMX 1616
4G SM
16x16 (2)
Fiber Optic
(multimode)
SMX 88
FOX 4G MM
8x8 (1)
SMX 1616
4G MM
16x16 (2)
USB
USB B
input
USB A
output
SMX 44 USB
4x4 (1)
SMX 84 USB
8x4 (1)
The 2U frame has 4 single board slots, the 3U frame has 6 board slots, the 4U frame has
8 slots, and the 5U frame has 10 slots. Each slot supports power and control connections
to the I/O boards. When a board is installed into a slot it may use more than one slot. For
example, the SMX 1616 VGA board uses four slots. The slots that a board covers are not
available for other I/O board installation until that multi-slot board has been removed (see
Installing the I/O Boards on page 10 for details).
NOTE: To customize the SMX unit, use the SMX Configurator program, available at
www.extron.com, or contact Extron Customer Support (see back cover for contact
numbers).