User Guide Manual

SMX System MultiMatrix Switcher • SMX Control Software 60
2. Click the Software tab.
3. Scroll to the SMX Control Program and click Install.
4. Follow the on-screen instructions. The installation program creates a C:\Program
Files\Extron\SMX
folder.
Within this folder are created three icons for the SMX Control pgm, SMX Help, Uninstall
SMX Control pgm.
Starting the Program
1. Click Start > Programs > Extron Electronics > SMX Control Program > SMX
Control Pgm
(or select the desktop icon, if created during installation).
The Comm Port Selection window appears.
2. Choose the comm (serial) port that is connected to the SMX or select IP [LAN].
NOTE: For a comm port, check the baud rate displayed in the comm port selection
window. To change the baud rate, click the Baud button and select the desired
baud rate from the list.