User Guide Manual

SMX System MultiMatrix Switcher • SIS Configuration and Control 58
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Set e-mail recipient
EX8@,X8! CR} IprX8@,X8!,] Sets e-mail address to account X8@.
Read e-mail recipient
EX8@ CR} X8!,] Read e-mail address of account X8@.
Set e-mail events for recipient
EX8# X8@,X9),X8$,X8%EM} X9)IpeX8#,X8@*X8$*X8%...X8%]
Example:
EI65,02,00,2EM} 02IpeI65*00*2222222222222222]
View e-mail events for
recipient
EX8# X8@,X9),X8$EM} X8%X8%X8%...X8%]
Set serial port parameters
E*X5!,X6^,X6&,X6*,X6(CP} CpnX5! CcpX6^,X6&,X6*,X6(]
Read serial port parameters
EX5! CP} X6^,X6&,X6*,X6(]
Set mode
EX5!*X7) CY} CpnX5!
•
CtyX7)] Sets port X5! for RS-232 or
RS-422 control.
Read mode
ECY} X7)]
Set current conn port timeout
E0*X8* TC} Pti0*X8*]
Read current conn port
timeout
E0TC} X8*]
Configure global IP port
timeout
E1*X8* TC} Pti1*X8*]
Read global IP port timeout
E1TC} X8*]
NOTES:
X5! = Specific port number 01 - 02
X6^ = Baud rate: 9600 = default
19200
38400
115200
X6& = Parity: O = odd
E = even
N = none
M = mark
S = space
X6* = Data bits 7, 8
X6( = Stop bits 1, 2
X7) = Port type 0 = RS-232 (default)
1 = RS-422
X8! = E-mail recipient address
X8@ = E-mail account 65 - 72
X8# = Notification selection 1 I = inputs
F = fans
P = power supply
X8$ = Notification selection 2 If X8# = I, then X8$ = 00 (all inputs), or 1 - 16
If X8# = F, then X8$ = 00 (both fans), 01 (fan 1), or 02 (fan 2)
If X8# = P, then X8$ = 00 (both power supplies), 01 (PS 1), or 02 (PS 2)
X8% = Notify when ? 0 = no response
1 = failed or missing
2 = fixed or restored
3 = both 1 and 2
4 = suspend
5 = un-suspend
X8* = The number of seconds x10 1 - 65000 = 10 - 650,000 seconds
before timeout on IP connections 30 = default (300 seconds)
X9) = Slot address 00 = fan and power supply
01 - 10 = inputs