User Guide Manual

SMX System MultiMatrix Switcher • SIS Configuration and Control 47
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Query part number and slot
information
N 60-xxx-yy
*N
60-xxx-yy.
X3!n
1
X3!n
2
X3!n
3
... X3!n
6/8/10
]
Pno 60-xxx-yy.X3!n
1
X3!n
2
X3!n
3
... X3!n
6/8/10
]
Verbose mode 2 or 3
Example:
*N Pno60-857-01.L04J07G00G00G00G15D00D15C00C15
Where
X3!n
x
= XYZ; X = type of board (B-T & X), YZ = board size
(00-15) and nx is the number of the slot the board is installed in.
NOTE: Left table gives X value. Right table gives YZ value.
n1 = Slot 1 L04 DVI board (L) 4x4 configuration (04) - 1 slot board
n2 = Slot 2 J07 HD-SDI bard (J) 8x8 configuration (07) - 1 slot board
n3 = Slot 3 G00 Slot 3 is covered by VGA board (G) no board (0)
n4 = Slot 4 G00 Slot 4 is covered by VGA board (G) no board (0)
n5 = Slot 5 G00 Slot 5 is covered by VGA board (G) no board (0)
n6 = Slot 6 G15 VGA board (G) 1616 configuration (15) - 4 slots board
n7 = Slot 7 D00 Slot 7 is covered by S-video BNC board top (D) no board (0)
n8 = Slot 8 D15 S-video BNC top board (D) 1616 configuration (15) - 2 slots (top) of 4
n9 = Slot 9 C00 Slot 9 is covered by S-video BNC board bottom (C) no board (0)
n10 = Slot 10 C15 S-video BNC top board (C) 1616 configuration (15) - 2 slots (bottom) of 4
A slot response can show either no board installed (X00), or the slot is covered by a multi slot board as shown in the
example above; slots 3, 4, and 5, (G00) are covered by the 1616 VGA board in slot 6.
(X) Board Type (X) Board Type
B Composite BNC N DVI Pro
C S-video BNC O HDMI
D S-video BNC 1616 P FOMX 1616
E Wideband Q FOMX 88
F S-video DIN R Reserved
G VGA 1616 S Reserved
H VGA 88/84 T Reserved
I Audio analog U USB
J SDI/HDSDI V Reserved
K Sync W DVI (2 data blocks)
L DVI X No board installed
M DVI Y DVI (2 data blocks)
Reference
# (YZ)
Board Size Note
15 16x16
09 8x4x2 For S-video BNC
08 8x8x2 For sync and S-video
07 8x8
06 8x4
05 4x8
04 4x4
00 No board installed or
slot covered by multi slot
board
Refer to next slot for size
of board
NOTE:
X3! = board type and board size (XYZ) X = Type of board (B - Y)
YZ = Board size (00 - 15)