User Guide Manual
SMX System MultiMatrix Switcher • SIS Configuration and Control 43
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
View Ties
NOTE:  If the view follow-all tie command (!) is used for an output with a break-away tie, the SMX will respond with an 
error message (E14).
View RGBHV output tie
X2@*X#& X@]
X2@
OutX#
•
InX@
•
RGB]
View RGBHV input tied to output X# 
on plane 
X2@.
Verbose mode 2 or 3
View video output tie
X2@*X#% X@]
X2@
OutX#
•
InX@
•
Vid]
View video input tied to output X# on 
plane 
X2@.
Verbose mode 2 or 3
View audio output tie
X2@*X#$ X@] 
X2@OutX#
•
InX@
•
Aud]
View audio input tied to output X# on 
plane 
X2@. 
Verbose mode 2 or 3
RGB/Video Mute by Plane
RGB/video mute
X2@*X#*1B X2@ VmtX#*1] Mute RGB/video output X#.
RGB/video unmute
X2@*X#*0B X2@ VmtX#*0] Unmute RGB/video for X#.
Read RGB/video mute
X2@*X#B X(] Read RGB/video output X#.
RGB/video mute entire plane
X2@*1*B X2@Vmt00*1] Mute RGB/video plane X2@.
RGB/video unmute entire 
plane
X2@*0*B X2@Vmt00*0] Unmute RGB/video plane X2@.
Audio Mute by Plane
Audio mute
X2@*X#*1Z X2@ AmtX#*1] Mute audio output X#.
Audio unmute
X2@*X#*0Z X2@ AmtX#*0] Unmute audio for X#.
Read audio mute
X2@*X#Z X(] Read audio output X#.
Audio mute entire plane
X2@*1*Z X2@Amt00*1] Mute all audio on plane X2@.
Audio unmute entire plane
X2@*0*Z X2@Amt00*0] Unmute all audio on plane X2@.
View Mute
View output mutes 
(entire plane)
EX2@ VM}
X1$
1
X1$
2
...X1$
n
]
View output mute for plane X2@.
Mut
 X2@*X1$
1
X1$
2
...X1$
n
]
Verbose mode 2 or 3
RGB Delay (Triple Action Switching) - for VGA / RGBHV Only
Set RGB Delay (by plane)
EX2@*X#*X1# D} X2@OutX#
•
DlyX1#] Set the RGB Delay of output X#.
Read RGB Delay
EX2@*X# D} X1#]
NOTES:  
X@ = Input number  01 – <maximum number of inputs> 
X# = Output number     01 – <maximum number of outputs> 
X( = Mute status      0 = off 
     1 = on 
X1# = RGB delay interval  10 = maximum (in 0.5 second increments) 
X1$ = Video/Audio mute status   0 = no mutes 
   1 = video mute 
  2 = audio 
  3 = video and audio mute 
X2@ = Plane number   00 - 15 (16 planes)










