Setup Guide

29SMX System MultiMatrix Switcher • SIS Programming Guide
Command ASCII Command
(host to switcher)
Response (switcher to host)
Additional Description
Commands Specic to SMX USB Boards Port Emulation for Outputs
Set port emulation for all outputs
EE X3)*X(*USBC} X3)UsbcE0*X(]
Enable or disable port emulation for all outputs.
Set port emulation for output
pairs
EE X3)*X#*X(USBC} X3)UsbcE X#*X(]
Enable or disable port emulation for output X#.
View port emulation status for
outputs
EE X3)*X#USBC} X(]
X3)UsbcE X#*X(]
Verbose mode 2 or 3
View port emulation status for all
outputs
EE X3)*USBC}
X(
1
X(
2
X(
3
...X(
n
]
X3)UsbcE*X(
1
X(
2
...X(
n
]
Verbose mode 2 or 3
Signal Status View input signal status
EI X3)*X!USBC} X1@]
X3)UsbcI X!*X1@]
Verbose mode 2 or 3
View all input signal status
EI X3)*USBC}
X1@
1
X1@
2
X1@
3
...X1@
n
]
X3)UsbcI*X1@
1
X1@
2
X1@
3
...X1@
n
]
Verbose mode 2 or 3
View output signal status
EO X3)*X#USBC} X2)]
X3)UsbcO X#*X2)]
Verbose mode 2 or 3
View all output signal status
EO X3)*USBC}
X2)
1
X2)
2
X2)
3
...X2)
n
]
X3)UsbcO*X2)
1
X2)
2
X2)
3
...X2)
n
]
Verbose mode 2 or 3
NOTES: X! = Input number 01 - 08
X# = Output number 01 - 04 X( = Emulation status 0 = off, 1 = on X1@ = Input connection status 0 = off, 1 = on X2) = Output connection status 0 = no active connection on A or B, 1 = 1st (A) port connected/2nd (B) port not connected, 2 = 1st (A) port not connected/2nd (B) port connected, 3 = active connection on both A and B X3) = Slot number 01 - 10, 0 = hard coded representing all outputs