Setup Guide
25SMX System MultiMatrix Switcher • SIS Programming Guide
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional Description
Plane Presets
Save current ties as a plane
preset
X2@
*
X1!
*0,
X2@
Spr
X1!
]
Save the current set of ties as plane
preset
X1!
. The command character
is a comma (,).
Recall a plane preset
X2@
*
X1!
*0.
X2@
Rpr
X1!
] Recall plane preset
X1!
, which
becomes the current configuration.
The command character is a period
(.).
Virtual (Multi Plane) Denition
Write virtual plane address
EX2(,X2@
1
,X2@
2
,...X2@
n
MP} MpvX2(,X2@
1
,X2@
2
,...X2@
n
]
Write virtual plane addresses .
Read virtual plane address
EX2( MP}
X2@
1
,X2@
2
,...X2@
n
]
Read virtual plane address.
Front Panel Lockout (Executive Mode)
Lock front panel (advanced
functions)
2X
Exe2]
Enable advanced executive mode.
Lock front panel (advanced and
basic functions)
1X
Exe1]
Enable executive mode.
Unlock front panel
0X
Exe0]
Disable executive mode.
View front panel lock status
X
X(
] X( = status of executive mode.
NOTE: For full lock mode details, refer to Setting the Front Panel Locks (Executive Modes) on page 18.
NOTES: X( = Executive mode: 0 = unlocked (all functions), 1 = locked (basic and advanced), 2 = locked (advanced, default value)
X1!
= Preset number 01 - 32 for global presets, 1 - 10 for plane presets
X2@ = Plane number 00 - 15
X2( = Virtual plane number 90 - 99