Setup Guide

ManualsBrandsExtron Electronics ManualsHardwareSMX System

22 SMX System MultiMatrix Switcher • SIS Programming Guide

SIS Command Tables

Command ASCII Command

(host to switcher)

Response

(switcher to host)

Additional Description

Output Switching by Plane

NOTES: The & tie command for RGBHV and the % command for video can be used interchangeably.

The ! tie command can be used for switching both video signals and audio signals with the same plane address.

Tie input to an output (RGBHV)

X2@

Out

•In

• RGB] Tie input

to output

on plane

X2@

for RGB signals.

Tie input to an output (video)

X2@

Out

•In

• Vid] Tie input

to output

on plane

X2@

for video signals.

Tie input to an output (audio)

X2@

Out

•In

• Aud] Tie input

to output

on plane

X2@

for audio signals.

Tie input to an output (all)

X2@

Out

•In

• All] Tie input

to output

on plane

X2@

for all signals.

NOTES: The & tie command for RGB and the % tie command for video can be used interchangeably.

The & read tie command for RGB and the % read tie command for video can be used interchangeably.

Tie input to all (RGBHV)

X2@

• RGB] Tie input

to all outputs on plane

X2@

for RGB signals.

Tie input to all (video)

X2@

• Vid] Tie input

to all outputs on plane

X2@

for video signals.

Tie input to all (audio)

X2@

• Aud] Tie input

to all outputs on plane

X2@

for audio signals.

Tie input to all (audio and video)

X2@

• All] Tie input

to all outputs on plane

X2@

, all signals.

NOTES: X@ = Input number 01 - <maximum number of inputs>, 00 = untied

X# = Output number 01 - <maximum number of outputs>

X2@ = Plane number 00 - 15, 90 - 99 (virtual plane)