User guide
•  Dropped Packets: — Total dropped packets for the current source since playback of 
the stream started.
•  Dropped %: — Total percentage of dropped packets for the current source since 
playback of the stream started.
•  Jitter: — For transport streams, audio and video streams are combined for this 
value.
•  Audio Jitter: — For elementary streams, the audio stream jitter in milliseconds.
•  Video Jitter: — For elementary streams, the video stream jitter in milliseconds.
The data in all current stream catagories resets automatically when a new stream is selected 
or when play stops.
The Total panel displays a running total of raw network statistics from the interface for all 
streams, files, or clips played since the last manual reset including:
•  Collisions: — Always zero for full duplex links.
•  Rx_Bytes: — Receive data statistics.
•  Rx_dropped: — Receive data statistics.
•  Rx_errors: — Receive data statistics.
•  Rx_packets: — Receive data statistics.
•  Tx_Bytes: — Transmit data statistics.
•  Tx_dropped: — Transmit data statistics.
•  Tx_errors: — Transmit data statistics.
•  Tx_packets: — Transmit data statistics.
Press Reset Totals to return the values in the Total panel to zero. The information 
monitoring begins automatically after each reset.
Device Status panel
Device Status panel — Monitors general operating conditions including:
•  Power Mode: — Operating or standby.
•  Temperature: — Current internal temperature of the device. Readings above 60°C 
could indicate excessive ambient termperature or insufficient ventilation and should be 
investigated.
•  Processor Usage: — A general indication of the device workload.
•  Memory Usage: — Provides an indication of volatiile memory usage. It is typically 15% 
after a power cycle, and expected to approach 100% after playing large clips from 
shared network folders.
•  Up Time (operating) Hours: — The time in days, hours, and minutes since the 
SMD101 was powered up or reset.
Local Storage panel
The Local Storage panel provides about the user accessible non-volatile storage including:
•  Type — Internal 
•  Name — User Content (can not be changed)
•  Total — Total size of the internal non-volatile storage in megabytes.
•  Used — Size of the files currently in local storage in megabytes.
•  Available — Currently unallocated drive space.
NOTE:  Used plus Available may not exactly add up to the Total size due to system 
requirements.
SMD101 • Web-based User Interface 46










