User Guide User Manual

VersaTools
®
SEQ 100 Skew Equalizer
VersaTools
®
SEQ 100 Skew Equalizer, cont’d
4
VersaTools
®
SEQ 100 Skew Equalizer
5
Rack mounting instructions
For optional rack mounting, mount the SEQ on any of the
following rack shelves:
• RSF 123 3.5" deep 1U VersaTools
®
rack shelf kit
(part #60-190-20) (figure 2)
• RSB 123 3.5" deep 1U VersaTools rack shelf
(part #60-604-20)
• RSU 126 6" deep 1U universal rack shelf kit
(part #60-190-10)
• RSB 126 6" deep 1U basic rack shelf (part #60-604-10)
• RSU 129 9" deep 1U universal rack shelf kit
(part #60-190-01) (figure 3)
• RSB 129 9" deep 1U basic rack shelf (part #60-604-01)
• MBB 100 VersaTools back of the rack mounting kit
(part #70-367-01)
In-rack installation
On the non-VersaTools rack shelves, the SEQ can be mounted in
the front or the rear of the rack (figure 3).
(2) 4-40 x 3/16"
Screws
Use 2 mounting holes on
opposite corners.
VersaTools Rack Shelf
1/4 Rack Width Front
False Faceplate
Figure 2 — Mounting the SEQ on a VersaTools rack
shelf
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
1/4 Rack Width
Front False
Faceplate
1/2 Rack Width
Front False
Faceplate
Both front false faceplates
use 2 screws.
Figure 3 — Mounting the SEQ on a standard rack
shelf
1. Remove the feet from the bottom of the SEQ, if they are
installed.
2. Mount the SEQ using two 4-40 x 3/16" screws in opposite
(diagonal) corners to secure the SEQ to the shelf.
3. Install false faceplate(s) or other unit(s) to the rack shelf.
4. Insert the shelf into the rack, aligning the holes in the shelf
with those of the rack.