User’s Guide HDSDI-ACR 100 SDI-AVR 100 High Definition SDI to Component Video/RGB Converter SDI to Video/RGB Converter 68-553-01 C Printed in the USA 02 02
Installation Overview The Extron HDSDI-ACR 100 converts a high definition (HD) serial digital interface (SDI) input (SMPTE-292M) to either analog component or RGB video. The converter supports the 720p, 1080i, and 1080p HDTV rates. The 1080p rate is limited to a maximum 30 Hz refresh rate and includes 1080p segmented frame 23.94/24. DIP switches select between RGB and component video, and, for component video output, between bi-level and tri-level sync, and sync on the Y output or on all outputs.
OUT SOG RGB/YUV SET UP BETA COLOR BARS NTSC/PAL IN COMPOSITE OUTPUT R/R-Y G/Y B/B-Y H V S S-VIDEO OUTPUT 5 ON ON OFF 50/60 Hz 0.2A 6 1 OUTPUTS 2 RGB/Component (HDSDI-ACR 100) or RGB/YUV (SDIAVR 100) switch — Set this switch to the Off position to output RGB video. Set the switch on for component video.
Indicators and Specifications FORMAT 720P 1080I 1080P HDSDI-ACR 100 HDSDI TO VIDEO/RGB CONVERTER 1 2 3 4 Figure 5 — HDSDI-ACR 100 front panel The equalization applied to the SDI-AVR 100’s input signal is sufficient for an input coaxial cable length of at least 1000 feet (305 meters) of Extron SHR cable or Belden 8281 cable.
Impedance .................................... 75 ohms Return loss .................................... -30dB @ 5 MHz Sync Output type .................................. Standards (SDI-AVR 100 only) .. Output impedance ....................... Max. rise/fall time ....................... Polarity .......................................... RGBHV, RGBS, RGsB NTSC 3.58, PAL 4.43, Betacam 75 ohms 200 nS SDI-AVR 100 ............ negative HDSDI-ACR 100 ......
