User Guide Instruction Manual

System 5

• SCP 100 User’s Manual • Extron

Reference

Extron’s Comm-Link cable

Comm-Link cable was designed for installations such as the

System 5. You may choose to use this or a similar low-loss cable.

Pin assignments and suggested Wire usage is as follows:

A = Signal without carrier (violet or blue) = 22 AWG

B = Ground (black) = 18 AWG

C = Signal with carrier (white) = 22 AWG

D = Ground (Drain) = 24 AWG

E = +12V (red) = 18 AWG

Figure 2-2. Extron’s Comm-Link cable was designed for use with the SCP 100.

Part Numbers

Comm-Link Cable:Cut lengths Part #

50 feet 26-461-01

100 feet 26-461-02

200 feet 26-461-03

400 feet 26-461-04

Bulk spools:

500 feet 22-119-02

1,000 feet22-119-03

SCP 100 Panels:

Gray 60-239-01

Black 60-239-02

White 60-239-03

Captive Screw Connector:

5-pole, 3.5 mm 10-319-10

(included with each SCP 100)

2-3