User guide

Command Description ASCII Command Response Additional Description
Firmware Version, Part Number and Information Requests
Query firmware version
number
Q/q
x.xx
]
Display firmware version
Request part number for VSC
500
N/n
60-476-01
]
Display part # for VSC 500
Request part number for VSC
700
N/n
60-477-01
]
Display part # for VSC 700
Request part number for VSC
700D
N/n
60-477-02
]
Display part # for VSC 700D
Request information
I/i
HrtX!•Vrt X!]
Display status of VSC
Command and Response Table for SIS Commands: VSC 700/700D Only
Command Description ASCII Command Response Additional Description
Horizontal Filter (detail)
Specify the horizontal filter
value
X1! D Dhz X1!]
Specify the detail value
Decrement one step
-D
Dhz
X1!]
Decrease the detail level by one
step
Increment one step
+D
Dhz
X1!]
Increase the detail level by one step
View the horizontal filter value
D
X1!]
Show the horizontal detail level
Flicker Filter
Specify the flicker filter value
X1! d Dvz X1!]
Specify the flicker value
Decrement one step
-d
Dvz
X1!]
Decrease the flicker by one step
Increment one step
+d
Dvz
X1!]
Increase the flicker by one step
View the flicker filter value
d
X1!]
Show the flicker value
Command and Response Table for Special Function SIS Commands:
VSC 700/700D Only
The syntax for setting a special function is X\ *_ # where _ is the function number and
X\ is the value. To view a function’s setting, use _# where _ is the function number. In
the following table the values of the X\ variable are different for each command/function.
These values are given in the rightmost column.
Command Description ASCII Command Response Additional Description
Encoder Filter (sharpness)
Specify the encoder filter level
Example:
X\ * 10#
3 * 10#
Enc X\]
Enc 03]
Specify the encoder filter level (0 - 3)
Example: set the encoder filter level to 3
View the encoder filter level
10#
X\]
Show the encoder filter level
VSC 500/700/700D User Guide • Serial Communication 25