User guide

Encoder adjustment submenu (Encoder)

Rotate the horizontal ([) or vertical adjustment knob ({) to select from four levels (0 to 3)

of encoding to maintain image sharpness. The default is 2.

Zoom Menu (Zoom)

The following flowchart provides an overview of the Zoom menu.

Zoom Hzm 0512

Vzm 0512

NEXT NEXT

Zoom control

• Zoom in and out starting

with the current size

(default is 512)

Filters

Figure 17. Zoom Menu

Zoom in/out adjustment submenu (Zoom)

Rotate the horizontal ([) or vertical adjustment knob ({) to adjust the zoom settings of a

displayed image. The zoom adjustment increases or decreases the overall size of an image

and is based on the current size setting. See Front Panel Features in this section for a

description of the Size button.

NOTE: The default value for horizontal and vertical size is 0512. The default values

for the horizontal and vertical shift are 2048 and 1024, respectively. The actual

minimum and maximum values will vary and are based on the incoming scan

rate.

Genlock Menu (Genlock)

The following flowchart describes the Genlock menu. Genlocking is available on the

VSC 700 and 700D only.

Genlock Hph Sub

128 128

NEXT NEXT

Horizontal phase and

Subcarrier phase

• Adjust either phase from 0 to

255 (default is 128).

Zoom

Figure 18. VSC 700 and 700D Genlock Menu

Horizontal and Subcarrier Phase submenu (Hph Sub)

Rotate the horizontal ([) and vertical adjustment knob ({) to adjust the horizontal phase

and color subcarrier phase, respectively (see Genlock and Vertical Interval Switching in

this section). Adjust either phase from 0 to 255. The default is 128.

VSC 500/700/700D User Guide • Installation and Operation 15