User manual

Mounting the Optional AAP Device

Various Extron RGB 580xi AAP double-space devices may be mounted to any Extron product

that has an AAP faceplate, or to an Extron AAP wallplate. The AAP device should be cabled

before it is attached to a faceplate or wallplate (see “Cabling the AAP Device Rear

Connectors”). The screws needed for installing an AAP device are built into its front panel,

so no additional screws are needed.

1. Insert the screws of the AAP through the holes in the AAP faceplate or the AAP

wallplate. Secure the AAP device to the faceplate or wallplate with the provided captive

washers and #4-40 nuts.

Cable

Clamp

RGB 580xi SI AAP

AAP 102

#4-40 Nut w/ Captive

Washer

RGB 580xi SI AAP

COMPUTER

AUDIO

H SHIFT

INPUT

SELECT

Figure 11. Example of Mounting an AAP Device to a Wallplate

2. Follow steps 3 through 8 in the “Installation Overview” section.

RGB 580xi • Mounting 26