User Guide Manual
Specications
Video
Routing .......................................... 3 x 1 router
Gain ............................................... 0.5 V to 1.45 Vp-p
Bandwidth ..................................... 300 MHz (-3 dB)
Rise time ........................................ 1.5 ns
EDID ............................................... Supports emulation of custom or factory preset Extended Display Identification
Data (EDID) tables (EDID model only)
Video input
Number/signal type ........................ 3 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 3 female 15-pin HD
Nominal level ................................. 0.7 Vp-p for RGB
Minimum/maximum levels .............. Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain
Impedance ..................................... 75 ohms
Horizontal frequency ...................... 15 kHz to 150 kHz
Vertical frequency ........................... 40 Hz to 140 Hz
Return loss ..................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ............. 4 V
Video output
Number/signal type ........................ 1 analog RGBHV, RGBS, RGsB
Connectors .................................... 6 female BNC
Nominal level ................................. 0.7 Vp-p for RGB
Minimum/maximum levels .............. 0.3 V to 1.30 Vp-p
Impedance ..................................... 75 ohms
Return loss ..................................... -30 dB @ 5 MHz
DC offset ....................................... ±5 mV maximum with input at 0 offset
Sync
Input type ...................................... RGBHV, RGBS, RGsB, RsGsBs
Output type ................................... RGBHV, RGBS, RGsB
Input level ...................................... 2 V to 5.5 Vp-p with ±0.2 VDC offset max.
Output level ................................... TTL: 4V to 5V p-p, unterminated
Input impedance ............................ 510 ohms
Output impedance ......................... 75 ohms
Max. propagation delay .................. 85 ns
Max. rise/fall time ........................... 2 ns
Polarity ........................................... RGBHV: tracks polarity (or force negative sync via internal jumper)
RGBS, RGsB: negative
Audio
Routing .......................................... 2 x 1 stereo router
Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ........................ 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................... 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
RGB 203 Rxi • Specications 20