User manual

www.HDfury2.com
8 HDfury2 User Manual
receiver/pre-amp and not use the HDfury2 sound output. Typically there is no need to
use the audio features of the HDfury2 with a home theater setup. If you require 5.1
Dolby Digital or DTS sound out of your HDfury, consider the Hdfury3.
How do I hook up the audio from the HDfury2?
The HDfury2 has both analog and digital (TOSLINK) audio output in one connector
located on the bottom of the unit. It's a 2-in-1 round connector meaning that you can
plug in either a 3.5mm stereo analog jack or a digital mini-TOLINK (3.5mm mini-jack)
cable and get stereo analog sound or stereo digital sound out of the HDfury2. See
further below for pictures of both types of connectors/cables.
HDfury2 3.5mm mini-TOSLINK digital audio cable:
If you'd like to use a "regular" TOSLINK cable, use a 3.5mm Mini-TOSLINK to regular
TOSLINK adapter:
A 3.5mm stereo audio cable can be used for connecting the HDfury2 to a TV if you do
not have a home theater setup (you only have 2 speakers in your TV):
The audio output of the HDfury2 gets all distorted after a while. What's wrong?
The HDfury2 supports 2 channel audio up to 192Khz sampling rate per channel. It does