User manual

www.HDfury2.com
17 HDfury2 User Manual
• RGB-H/V Male Port D-SUB 15 Output video analog signals (0.7Vpp (RGB) /
1Vpp (YPbPr) over 75 ohms impedance)
• Ultra short Analog links (<1 cm) on the HDfury2 for optimal quality
• HDMI video bandwidth: 25-165MHz
• HDMI Data Rate - Bandwidth 1.5 Gbit/sec (Single link)
• Supports all HD/SDTV formats from 1080p down to 480i
• HDTV ready (480i/480p/576i/576p/720p/1080i/1080p48/50/60 compatible)
• DVI 1.0 compliant
• HDMI 1.1 and 1.2 ready
• HDMI 1.3 interoperable
• HDCP compatible with embedded keys loaded
• HDCP ready
• Reprogrammable Firmware (with specialized tools)
• Screen position adjustable through Firmware and Custom Profile
• Accepts third party accessories on output such as the GAMMA-X (Gamma
Correction)
• Automatic Input Format Detection: Digital YCbCr and RGBHV
• Full dynamic range for all input modes to maximize the level of detail
• Automatically switches color-spaces for both HDTV (Rec.709) and SDTV
(Rec.601)
• Precise black levels - no black crush in any standard mode
• Stereo High-Quality Analog Audio Output
• Stereo High-Quality Digital/Optical Audio Output (S/PDIF format)
• HD-DVD and Blu-Ray Disc player compatible
• Playstation3 and Xbox360 compatible
• Satellite and Cable set-top box compatible for HDTV
• HDMI or DVI-D video graphics card compatible
• HDCP compatible with embedded keys loaded
• Energy management : DVI and VESA DPMS compatible
• Ultra low power consumption in Standby (3,5mA)
• Maximum power : 0.37A under 5V (at 1080p/60)
• On-board DC/DC converter (1.8V) with extra-low EMI signature
• Power +5V from DVI/HDMI
• Blue LED to display active digital link and power status
• Small size : 75x56mm cabinet
• 100% ROHS compliant (Restriction of Hazardous Substances Directive)
• Installation: The HDfury2 module may be DIRECTLY screwed to the back of the
display into the VGA SUB-D plug.
• Shortest RGB and Component (YPbPr) analog video link as possible.
• HDCP rules compliant: No end-user access to decrypted analog video. Once
screwed, this module becomes "a part of the display itself".
• Professional factory made (mass-production) using pick/place and reflow/wave
solder pro equipment.
• Gold Plated connectors, tracks and material