User manual

www.HDfury2.com
16 HDfury2 User Manual
Specifications
Overview
• HDMI 1.1/1.2 input
• Component (YPbPr/YCbCr) and VGA (RGBHV) video output
• Sound output in both Analog and digital Optical (S/PDIF) through an innovative
3.5mm combo jack
• Perfectly centered image in all standard NTSC/PAL component modes (see
below)
• Performs Colour Depth Upscaling in all modes
• Automatic SD/HD color-space selection
• Accept third party accessories on its output
• Lowest power consumption of any converter
• Software upgradeable (EDID and Firmware)
• Custom profiling to match any display requirements or to limit output resolution
• Screen position adjustment through firmware
• Smaller and is able to handle and include more technology innovations than the
original HDfury
Details
• INPUT: Digital HDMI 19p FEMALE Port (100% digital)
• OUTPUT: Analog RGBHV or Component (YPbPr/YCbCr) via HD-15 D-Sub (VGA
style) MALE connector
• Supports *ANY* resolution and refresh rate in RGB mode up to 1920x1080/60Hz.
Includes all of the popular HDTV resolutions including:
480i/480p/576i/576p/720p/1080i/1080p24/48/50/60
• Supports the following HDTV resolutions in component mode:
480i/480p/576i/576p/720p/1080i/1080p24/48/50/60 compatible
• User Selectable RGBHV / Component (YPbPr/YCbCr) output with a switch
• A HDMI -> HDMI cable is used to connect to an HDMI source
• RGB 4:4:4 (8 bits) digital input
• YCbCr 4:4:4 or 4:2:2 digital input
• Compatible with non-HDCP (DVI-D) or HDCP sources
• Compatible with any RGB Display
• Compatible with any YUV Display
• Directly connects to a display's VGA (RGB) 15 pin D-Sub input
• Directly connects to a display's Component (YPbPr/YCbCr) input using included
breakout cable
• Takes less then 1 minute to install (Plug & Play)
• 11bit 200MHz data processing
• Triple 11bit 200Mhz video DAC