User manual

www.HDfury2.com
10 HDfury2 User Manual
I want to use the RGB (VGA) input on my display. How do I set the HDfury2 to
output RGB (VGA) video?
Switch the RGB/YUV switch on the side of the HDfury2 to “RGB”. Make sure to use one
of HDfury2 RGB cables to connect the HDfury2 to your display's RGB (VGA) input.
Three RGB cables are available: A VGA (D-Sub15) cable, a 5-BNC cable, and a special
Barco CRT projector port 3 cable. Do not use the component 3 RCA (phono) style
connector cable (shown above) as it will not work.
I have a scaler or doubler with DVI/HDMI inputs and an RGB or Component output
connected to my display device. I don't need an HDfury2 right?
Not true. You still need the HDfury2 if you want to use HDMI sources such as Blu-ray or
DVD players as they use HDCP (high definition copy protection). The scaler is not
allowed to output an analog RGB or Component signal. The scaler will simply TURN
OFF its analog output or limit it to 480i resolution. Only the digital DVI/HDMI outputs will
remain on. To solve this, connect the HDfury2 to the DVI/HDMI output of your scaler,
and then connect the HDfury2 to your display device using the analog RGB or
Component input. Simple!
I have a scaler or doubler with DVI/HDMI inputs and a DVI/HDMI output connected
to my display device's DVI/HDMI input. I don't need an HDfury2 right?
Maybe. You still need the HDfury2 if you want to use HDMI sources such as Blu-ray or
DVD players that have HDCP-protected content *and* your display device only has a
DVI input. The scaler, must pass the HDCP-protected content all the way to your
display device. The display device must decrypt the content. If your display device only
has a DVI input and it does not support HDCP, it will not be sent a signal. To solve this,
connect the HDfury2 to the DVI/HDMI output of your scaler, and then connect the
HDfury2 to your display device using the analog RGB or Component input. Simple!
I want to connect a longer cable to the output of the HDfury2. Can I do that?
Yes. The HDfury2 supports analog output cables up to 25-35 feet in length. The