Instruction manual

42 Encore Presentation System • User’s Guide
2. Hardware Orientation
Video Processor Rear Panel
3) Program 2 Out Analog
One 15-pin D connector is provided for the Analog Program 2 Output. Connect
to a standard VGA monitor for analog program monitoring at the Controller’s
location. This output is identical to the analog
Program 1 Output, except that it
does not include edge feathering and data doubling components. In Appendix A,
see the “
Analog 15-pin D Connector” section on page 348 for pinouts.
4) Program 2 Out DVI
One DVI connector is provided for the Digital Program 2 Output. Connect to a
DVI-capable monitor for digital program monitoring at the Controller. This output
is identical to the digital
Program 1 Output, except that it does not include edge
feathering and data doubling components. In Appendix A, refer to the “
DVI
Connector Pinouts” section on page 346 for pinouts.
5) Program 1 Out DVI
One DVI connector is provided for the Digital Program 1 Output. This output
includes all edge feathering and data doubling components, and is designed for a
digital connection to your projector. In Appendix A, refer to the “
DVI Connector
Pinouts” section on page 346 for pinouts.
6) Program 1 Out Analog
One 15-pin D connector is provided for the Analog Program 1 Output. This
output includes all edge feathering and data doubling components, and is
designed for an analog connection to your projector. In Appendix A, see the
“
Analog 15-pin D Connector” section on page 348 for pinouts.
7) Program Out HD/SDI
One BNC connector is provided for the optional HD/SDI (High Definition/Serial
Digital Interface) output. Connect to an SDI or HDTV monitor, or to video
distribution equipment. Refer to the “
Program Output Notes” section on page 48
for additional information on video outputs.
8) Program Link Out
One DVI connector is provided for the Program Link Output. To ensure proper
data doubling in wide screen configurations, this output connects to the
Program
Link Input
on another Processor.
~ In Chapter 3, refer to the “Program and Source Link Connections”
section on page 89 for details on the proper use of the connectors in
wide screen configurations.
~ In Appendix A, refer to the “DVI Connector Pinouts” section on
page 346 for pinouts.
9) Program Link In
One DVI connector is provided for the Program Link Input. To ensure proper
data doubling in wide screen configurations, this input connects to the
Program
Link Output from another Encore Processor.
~ In Chapter 3, refer to the “Program and Source Link Connections”
section on page 89 for details on the proper use of the connectors in
wide screen configurations.
~ In Appendix A, refer to the “DVI Connector Pinouts” section on
page 346 for pinouts.