Instruction manual

Encore Presentation System • User’s Guide 41
2. Hardware Orientation
Video Processor Rear Panel
sáÇÉç=mêçÅÉëëçê=oÉ~ê=m~åÉä
The figure below illustrates the Video Processor rear panel:
Figure 2-2. Video Processor Rear Panel
Please note:
• Connectors 1 through 11 are part of the Video Processor’s output board.
• All output connections are standard with the exception of the optional HD/SDI
output (connector 7).
• All program and preview DVI output connectors are digital only, and do not include
analog pins.
Following are descriptions of each rear panel connector and section.
1) Preview Out DVI
One DVI connector is provided for Digital Preview Output. Connect to a DVI-
capable monitor. In Appendix A, refer to the “
DVI Connector Pinouts” section on
page 346 for pinouts.
2) Preview Out Analog
One 15-pin D connector is provided for Analog Preview Output. Connect to a
standard VGA monitor. In Appendix A, refer to the “
Analog 15-pin D Connector”
section on page 348 for pinouts.
ETHERNET GENLOCK IN
DVI PREVIEW ANALOG
Hol
es
ANALOG PROGRAM 2 DVI
Hol
es
DVI PROGRAM 1 ANALOG
Hol
es
HD / SDI OUT INPROGRAM LINK
Hol
es
ANALOG
HD / SDI
DVI
INPUT 1A
Hol
es
ANALOG
HD / SDI
DVI
INPUT 2A
Hol
es
ANALOG
HD / SDI
DVI
INPUT 3A
Hol
es
ANALOG
HD / SDI
DVI
INPUT 1B
Hol
es
ANALOG
HD / SDI
DVI
INPUT 2B
Hol
es
ANALOG
HD / SDI
DVI
INPUT 3B
OUT INSOURCE LINK 1
OUT INSOURCE LINK 2
OUT INSOURCE LINK 3
SERIAL
1
UNIT ID
1
17
2 3 4 5 6 7 8 9 10 11
1615
12
13
14
1) Preview Out DVI 7) Program Out HD/SDI 13) M/E 2 Connectors
2) Preview Out Analog 8) Program Link Out 14) M/E 3 Connectors
3) Program 2 Out Analog 9) Program Link In 15) Unit ID Selector
4) Program 2 Out DVI 10) Ethernet Port 16) Serial Port
5) Program 1 Out DVI 11) Genlock 17) AC Connector
6) Program 1 Out Analog 12) M/E 1 Connectors