Instruction manual
Encore Presentation System • User’s Guide 35
NK==fåíêçÇìÅíáçå
What’s New in the User’s Guide, Rev. B
• Destination Flexibility
The Encore system offers comprehensive destination flexibility. In addition to
standard single screen and wide screen destinations (Video Processors), you can
configure
ScreenPRO-II units as destinations, plus three types of Aux
destinations: standard
Aux (monitors), ImagePRO Aux and PresentationPRO-II
Aux
. Refer to Appendix D, “Working With Destinations” on page 367 for details.
• Support for Video Processor IDs 17 - 32
Using the Miscellaneous Menu, you can re-define Video Processor IDs using
numbers 17 - 32. Only Video Processors that are
not currently defined as
destinations can be re-defined. In Chapter 5, refer to the “
Miscellaneous Menu”
section on page 179 for details.
• External Trigger Function
When Encore is used in conjunction with Barco Events Manager, the following
functionality is provided:
~ Timeline tasks can be triggered when specific Presets are recalled.
~ Playback of a paused timeline can be resumed (using Ext Trigger).
In Chapter 7, refer to the “
Using Ext Trigger” section on page 310 for details.
• Wide Screen Link Diagnostics
The Diagnostics Menu contains a {LINKS} softkey that accesses the Wide
Screen Link Diagnostics Menu
. This menu enables you to test the Program and
Source link cables that are required for wide screen operation. In Chapter 5, refer
to the “
Diagnostics Setup Menu” section on page 161.
• Third Party Router Support
Additional third party serial and Ethernet routers are supported in the Encore
Controller. In Chapter 5, refer to the “
Router Specification Menu” section on
page 174 for details.
• Copy Function
The copy function enables you to copy PIP and Key parameters between mixers.
In Chapter 7, refer to the “
Using Copy” section on page 309 for details.
• Downstream Key (DSK)
Encore’s DSK function enables you to use an unscaled DVI source or a scaled
frame grab as the downstream key. The
DSK Setup Menu allows you to set up
either a Luma or Color DSK. In Chapter 7, refer to the “
Modifying Keys” section
on page 304 for details.
• Color Keying using the Color Picker
Color Keying enables you to key off a color instead of a luminance value. The
color can be selected via RGB parameters or by using the “
Pick Color” option. In
Chapter 7, refer to the “
Modifying Keys” section on page 304 for details.
Note
In the Transition Functions Section, the new Ext Trigger
button replaces the previous blank button to the left of the
Black Preview button.
Ext
Trigger