Instruction manual

280 Encore Presentation System • User’s Guide
7. Operations
Prerequisites
mêÉêÉèìáëáíÉë
Prior to using the system and following the instructions in this chapter, please ensure the
following:
• All system destinations are properly configured. In Chapter 6, refer to the
“
Destination Setup" section on page 257 for details.
• All system inputs (sources) are properly configured. In Chapter 6, refer to the
“
Input Setup" section on page 271 for details.
• All system backgrounds are properly configured. In Chapter 6, refer to the
“
Background Setup" section on page 269 for details.
• The DSK is properly configured. In Chapter 6, refer to the “DSK Setup" section
on page 274 for details.
• Ensure that you are familiar with all Controller sections and buttons. In Chapter 4,
refer to the “
Controller Orientation" section on page 97 for details.
• Ensure that you are familiar with all system menus, and in particular, the
operational menus. In Chapter 5, refer to the following sections for details:
~ Refer to the “PIP Adjustment Menu" section on page 194 for details on
all PIP adjustment menu items.
~ Refer to the “Key Menu" section on page 203 for details on all Key
adjustment menu items.
~ Refer to the “Source Adjustment Menus" section on page 212 for
details on all input source adjustment parameters.
Tip
As you review each function, it is recommended that you try
out (and practice) each feature at the Encore itself — using a
fully configured system consisting of Program and Preview
monitors, projector(s), and all the required destinations,
sources and backgrounds.
Note
In this chapter, when a sequence of menu selections is
required to complete a given procedure, the "
>" symbol is
used to divide each successive menu pick.
S To access the Genlock Menu, press
OUTPUT > {GLCK}.