Instruction manual

18 Encore Presentation System • User’s Guide
NK==fåíêçÇìÅíáçå
Chapter Structure
`Ü~éíÉê=píêìÅíìêÉ
The following chapters provide instructions for all aspects of Encore Presentation System
operations:
• Chapter 1, “Introduction” provides a system overview, and a list of important new
features in this version of the User’s Guide.
• Chapter 2, “Hardware Orientation” on page 39 explains the Encore Presentation
System’s video processor hardware in detail.
• Chapter 3, “Hardware Installation” on page 51 provides comprehensive system
installation instructions.
• Chapter 4, “Controller Orientation” on page 97 describes each section of the
system’s two controllers — the models LC and SC.
• Chapter 5, “Menu Orientation” on page 135 explains the system’s configuration,
setup and adjustment menus, and provides basic menu “navigation” procedures.
• Chapter 6, “System Setup” on page 239 outlines procedures for setting up and
configuring the Encore Presentation System.
• Chapter 7, “Operations” on page 279 provides basic operating instructions.
• Appendix A, “Specifications” on page 341 lists the Encore Presentation System’s
input, output, video, mechanical and power specifications.
• Appendix B, “Contact Information” on page 357 lists important Barco contact,
RMA, warranty and technical support details.
• Appendix C, “Upgrading Software” on page 359 provides a detailed procedure
for upgrading Encore Presentation System software.
• Appendix D, “Working With Destinations” on page 367 outlines the steps
required when Encore is connected to external destinations.
• Appendix E, “Application Notes” on page 375 provides important application-
related information regarding system setup and operations.