Instruction manual

168 Encore Presentation System • User’s Guide
5. Menu Orientation
System Menu
Aux Setup Menu
From the Destination Setup Menu, select an Aux destination type, then press {AUX
SETUP
} to display the Aux Setup Menu. Please note:
• The {AUX SETUP} button appears when an Aux, ImagePRO Aux or PrePRO-II
Aux
destination is selected on the Destination Setup Menu.
• The Aux Setup Menu changes, depending upon the selected type of destination.
• In Chapter 1, refer to the “A Word About Destinations” section on page 26 for
examples of each Aux destination “type.”
When a standard
Aux destination “type” is selected on the Destination Setup Menu, the
Aux Setup Menu appears in this form:
Figure 5-25. Aux Setup Menu — Aux Destination (sample)
The following functions are provided:
• Top Line — displays the type of Aux destination and its selected number.
• Source Mapping — two selections are available:
~ Input Patch — maps Aux sources according to how your inputs are
patched to buttons in the console’s
Source Selection section.
~ Direct Map — maps Aux sources according to how your inputs are
connected to the router.
• Router Name — selects the router from which the Aux sources will be output.
• Router Output — selects the specific router output designated as an Aux (as
assigned on the router’s
Output Patch Menu).
• Press {RESET} to return all fields to <UNDEFINED>.
B
A
C
K
A
D
J
AUX SETUP
Source Mapping Direct Map
Router Name
Router Output
RESET
DEST_2
MATRIXPRO1
7
N
A
V