Instruction manual

166 Encore Presentation System • User’s Guide
5. Menu Orientation
System Menu
aÉëíáå~íáçå=pÉíìé=jÉåì
From the System Menu, press {DEST SETUP} to display the Destination Setup Menu.
Figure 5-24. Destination Setup Menu (sample)
The Destination Setup Menu enables you to define each destination. The following
functions are provided:
• Destination — sets the destination that you want to define. This field does not
depend on the destination currently selected on the
Destination Bus, but it does
correspond to the similarly numbered button on the Controller.
Once Processors have been assigned for wide screen usage, the system displays
(on the top “
Destination” line) how many M/Es are installed.
• Type — sets the selected destination type. Choices include:
~ Single Screen VP
~ Wide Screen VP
~ Single Screen VP Stack
~ Wide Screen VP Stack
~ Single Screen SP
~ Aux
~ ImagePRO Aux
~ PrePRO-II Aux
VP to Add
VP to Remove
Type
VPs assigned to Destination 1:
Widescreen VP
3
B
A
C
K
N
A
V
A
D
J
DESTINATION SETUP
REMOVE
ALL
ADD
Destination - 2 ME(s) 1
1
REMOVE
1, 2
Important
Encore can create wide screen configurations with Video
Processors that
do not have the same number of M/Es — in
which case, the system operates at the lowest common
denominator. For example, in a system consisting of a single-
M/E Processor and a three-M/E Processor, Encore will create
a single-M/E wide screen configuration.