Instruction manual

Encore Presentation System • User’s Guide 153
5. Menu Orientation
Output Menu
qÉëí=m~ííÉêå=jÉåì
From the Output Menu, press {TEST PATTERN} to display the Test Pattern Menu.
Figure 5-13. Test Pattern Menu (sample)
The Test Pattern Menu enables you to display test patterns for projector alignment.
• Output Monitor — selects the monitor(s) that are affected by the test pattern
settings, either
All, Program 1, Program 2 or Preview.
• Mode — enables you to turn test patterns on or off.
• Type — sets the test pattern. Choose between H Ramp, V Ramp, 100% Color
Bars
, 16x16 Grid, 32x32 Grid, Burst, 75% Color Bars, 50% Gray, Gray Steps
1
, Gray Steps 2, White, Black, Red, Green and Blue.
• Raster Box — when enabled, displays a raster box defined by the exact outer
edges of the selected output resolution.
S If the output is set to 1024 x 768, the raster box will encapsulate that
exact format.
Please note:
~ The Burst test pattern is the only pattern that is smaller than the selected
output resolution. When the
Raster Box is enabled, the Burst pattern
will appear within its boundaries.
~ The Raster Box can be enabled when the test pattern is Off.
• Alignment Test Pattern — this field appears in wide screen mode only. It
enables you to turn the alignment test pattern on or off from this menu (in addition
to the
Wide Screen Settings Menu).
Mode
B
A
C
K
N
A
V
A
D
J
TEST PATTERN
Output Monitor All
ON
Raster Box On
Type Burst
Alignment Test Pattern Off