Instruction manual

Encore Presentation System • User’s Guide 151
5. Menu Orientation
Output Menu
dÉåäçÅâ=jÉåì
From the Output Menu, press {GLCK} to display the Genlock Menu.
Figure 5-11. Genlock Menu (sample)
The Genlock Menu tells the Video Processor which type of analog genlock signal is
connected to the Processor’s
Genlock connector.
• Source — sets the genlock source, either Black Burst, CSync or None.
• Type — displays the type of genlock provided:
~ When Source = None, Type = [ Free-Run ]
~ When Source = Black Burst, Type = [ V Lock ]
~ When Source = CSync, Type = [ V Lock ]
Please note:
• PAL or NTSC black burst or composite sync signals are recommended.
• In wide screen applications, all Processors must be locked together. If you
provide genlock to the first Processor in your configuration, genlock is
automatically distributed to the other Processors via
Program Link connections.
• If you do not use genlock in a wide screen application, Encore automatically
makes the first Processor in your configuration the master.
• In single screen applications, each Processor requires its own genlock signal.
• Genlock is highly recommended in configurations that utilize camera sources.
Type
B
A
C
K
N
A
V
A
D
J
GENLOCK
Source Black Burst
[ V Lock ]